Career Opportunities

Experience: 5-8 years

Education: Bachelor’s degree

Language: English (proficient)

Responsibilities:

Develop hardware for smart home/IoT products, including requirements analysis, specification analysis, component selection, schematic design, PCB layout, BOM creation, hardware debugging, and pilot line follow-up.

• Write and output product process development documents.
• Familiar with 4G and Wi-Fi modules from companies like Quectel and Simcom, with sufficient experience and knowledge in handling RF interference.
• Familiar with micro-controller interfaces, with experience using ST, ESP, RK, and MTK preferred.
• Solid understanding of analog/digital/RF hardware functions and familiarity with the internal architecture of chip components, including understanding the causes of device failure.
• Collaborate closely with other departments to ensure the timely achievement of overall product goals.

Qualifications:

• Bachelor’s degree or higher in Electronics Engineering or a related field, with 5+ years of relevant work experience, independent project experience, and English reading and writing skills.
• Familiar with 2.4G/5G RF, with experience in one or more wireless communication technologies such as NB-IOT/Wi-Fi/Bluetooth mesh. Familiar with MCU platforms such as STM32, Esp32, Rockchip, and Ingenic.
• Strong knowledge of analog circuits, digital circuits, and RF technology. Proficient in using software such as PADS, AD, and Allegro.
• Proficient in using various electronic experimental equipment, such as oscilloscopes, laboratory power supplies, signal generators, and logic analyzers.
• Experience in the smart home or IoT industry is preferred, and those with ideas for developing innovative products will be given priority.
• Possess a certain degree of innovation, a positive work attitude, a strong sense of responsibility, good communication skills, and a team spirit.

Experience: 5+ years

Education: Bachelor’s degree

Language: English (proficient)

Responsibilities:

• Develop and maintain firmware for UI control boards (buttons, LEDs, screens, UART devices, etc.) using the Motormaster software library.
• Write test plans and execute tests to verify functionality.
• Peer review software developed by other engineers.
• Participate in schematic and layout design reviews with electronic engineers.

Qualifications:

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field.
• 3+ years of experience writing embedded C software for 32-bit Cortex-M0 micro controllers.
• Excellent written and spoken English skills for reading and writing code documentation.
• Familiarity with multi-meters, oscilloscopes, soldering irons, and other tools for debugging hardware issues.
• Strong logical reasoning and troubleshooting skills.
• Experience with PID controllers, robotics, or motor control is a plus.

Experience: 3-5+ years

Education: Diploma

Language: English (proficient)

Responsibilities:

• Design and optimize SMT process flows and write process documents.
• Analyze and improve process defects.
• Evaluate and implement new products.

Qualifications:

• Diploma or higher in Mechanical, Electronics, Automation, or related field.
• 3+ years of experience in SMT process-related positions.
• Familiarity with SMT equipment (printing, placement, reflow soldering, wave soldering).
• Understanding of SMT design standards, appearance inspection standards, and SMT manufacturability requirements.
• Proficiency in drawing software and familiarity with stencil and tooling design.
• Excellent communication and coordination skills, and ability to withstand work pressure.

Experience: 5+ years

Education: Bachelor’s degree

Language: English (proficient)

Responsibilities:

• Collaborate with R&D hardware manager and product manager to develop test matrices for new product development.
• Utilize quality tools such as FMEA/8D to mitigate project quality risks.
• Assist R&D hardware and product managers in design reviews, pilot production reviews, and initial production quality confirmation.
• Monitor and supervise new product development processes to ensure system integrity.
• Collaborate with R&D hardware manager to develop inspection specifications for raw materials, components, and finished products.
• Track pilot production, small batch production, and production quality handover.
• Monitor and implement quality control plans.
• Follow up on new material evaluation and approval processes.
• Track and address design-related after-sales issues, and assist hardware manager in driving design improvements.

Qualifications:

• Bachelor’s degree or higher in Electronics, Communications, Computer Science, or related field.
• Excellent written and spoken English communication skills.
• Familiarity with product development processes, including IPD, CMMI, and ISO9001.
• Strong quality planning, quality process management, and control skills, including risk control, quality management, configuration management, etc.
• Ability to independently complete R&D quality planning, write quality specifications, and develop test matrices.
• Rigorous mindset, with excellent problem identification, analysis, and judgment skills, project management experience, and application capabilities.
• Excellent communication and expression skills, strong execution ability, and a sense of responsibility.

Experience: 5-8 years

Education: Bachelor’s degree

Language: English (proficient)

Responsibilities:

• Lead quality assurance for new product lifecycles, including test case/plan development, test execution (firmware, software, system, performance, safety, reliability), product approval, and bug/problem detection/management/closure.
• Prepare AQP documents to ensure CTQ and KPC control.
• Manage supplier quality and drive continuous improvement.
• Lead change management evaluation and implementation.
• Collaborate with internal NPI teams and external suppliers to improve product and process quality using LEAN methods.
• Handle customer complaints, support failure analysis, and drive field call rate reduction.
• Utilize quality tools to ensure product quality and compliance for global markets.
• Manage OQC, PPCM, ECN, customer complaints (8D), QBRs, monthly/quarterly evaluations, training, and supplier development.
• Conduct product/process failure analysis and implement corrective actions.

Qualifications:

• Minimum 5 years of experience in electronics-related manufacturing or design.
• Bachelor’s degree in Quality, Manufacturing, or a related field.
• Relevant experience in engineering or quality management.
• Experience in IoT or industrial control electronics project management (preferred).
• Experience in new product release, supplier management, and customer complaint handling.
• Open-minded and fast learner.
• Strong influence and communication skills with internal and external parties.
• Strong analytical and problem-solving skills.